SHR7.5-12
SHR7.5-12 is a 12V valve-regulated sealed lead-acid battery from the B.B. Battery SHR series, with a nominal capacity of 7.5Ah. This maintenance - free battery adopts an impact - resistant opaque ABS shell and efficient AGM technology, supports installation in any direction, provides high power density and excellent high - rate discharge performance, especially suitable for short - term backup power. It is designed to be sturdy with a long service life, making it an ideal and reliable power solution for UPS (Uninterruptible Power Supply), emergency lighting, security alarm systems, and various portable devices.
Taobao store
WeChat procurement
Product Features
- Maintenance free(no water topping-up required)
- No free acid(Non-spillable battery)
- The battery is designed for high rate usage
- Can be used in any orientation(excluding used inverted)
- Absorbent Glass Mat technology for efficient gas recombination
- The power density at 2 min-15min discharging rate is 30% higher than BP series
- Flame-arrestor is installed to ensure safety
Application Scenarios
- Uninterruptible power supplies
- Medical equipment
- Emergency lighting and video surveillance systems
- Access control and management systems
- Telecommunication facilities
- Data processing centres
- Alternative energy sources
- Electrical supply network and power industry
- Alternative energy sources
- Electrical supply network and power industry
Product parameters
- ModelSHR7.5-12
- Voltage12 V
- Nominal capacity 15 minutes W/cell30
- Weight kg2.05
- Weight lbs4.52
- Standard terminal typeT1
- Standard terminal position-
- Optional terminal typeT2
- Optional terminal position-
- Length mm151
- Length inches5.94
- Width mm51
- Width inches2.01
- Height mm94
- Height inches3.7
- Overall height mm100
- Overall height inches3.94
Product details
SHR7.5-12SHR series battery is a 12 - volt integrated battery using valve - regulated sealed lead - acid technology, specially designed for high - rate discharge scenarios. Its shell is made of sturdy, opaque, impact - resistant ABS plastic to ensure durability. The battery cover is firmly connected to the shell, and the terminal area is sealed to effectively prevent leakage. Terminal designs vary by model. The battery cover is provided with six liquid injection holes, through which electrolyte is filled during production, and then a pressure relief valve made of non - combustible material is installed. This design significantly improves the fire and explosion safety level of the product. Both positive and negative plates of the battery are coated with a special pasteThe coating, combined with the absorbent glass mat (AGM) technology, achieves efficient gas recombination capability, making the battery completely maintenance - free throughout its service life without the need for water replenishment. At the same time, the battery supports flexible installation and can be placed horizontally or vertically, but it should be noted that it is prohibited to use it upside down.
In terms of performance, SHR7.The 5-12 battery can provide excellent specific output power in short - time discharge mode. It is especially suitable for applications with backup time not exceeding 60 minutes. Its power output for a 15 - minute discharge to 1.3V per cell is 30 watts per block. The discharge power range of the entire SHR series covers 78 to 576 watts per block to meet different power requirements. The nominal voltage of the product is 12V, and its capacity under standard test conditions covers 3.6 to 24 ampere - hours, with specific values depending on different discharge rates such as C2, C5, C8, C10, C20, C100. According to Eurobat standards, this series of batteries has a long service life under normal usage conditions, expected to be 5 to 7 years, and even up to 10 years under some conditions. Its power density at discharge rates of 2 minutes to 15 minutes is about 50% higher than the same - brand BP series, showing significant high - performance advantages
This battery weighs approximately 2.05 kilograms, making it easy to handle and install. Its compact dimensions are 151 mm long, 51 mm wide, 94 mm high, with a total height of 100 mm, reserving space for standard installation. Terminal types are available as T1 standard terminals or T2 optional terminals to meet different wiring requirements
SHR7.The application scenarios of the 5-12 battery are extremely extensive. It is an ideal power source for low-power uninterruptible power supply systems, fire and safety alarm systems, emergency lighting, monitoring systems, and access control systems. It is also very suitable for providing reliable power to medical equipment and laboratory equipment. In the consumer and industrial fields, it can be used for fishing lights, boosters, power battery packs for toy cars, and backup power for rural estates, hotels, and stores. Additionally, it can play a stable role in power supply networks, the power industry, and even as auxiliary power for electric vehicles. With its high safety, maintenance-free features, and flexible installation methods, SHR7.The 5-12 battery provides solid power support for various devices that require reliable backup power and efficient discharge.
